楼主: liuqingsheng
收起左侧

[交流] 树莓派4B安装稳定版Ubuntu 19.10以及图形界面

 楼主| 2019-11-4 14:14:42 | 显示全部楼层
ZoeC5 发表于 2019-10-28 19:51
请问楼主有遇到过键鼠用不了以及命令行停在cloud-init的情况么?

这是BUG,ubuntu官方已经确认,正在解决。
如下处理,限制到3G内存即可。

In the meantime, developers can use a temporary workaround to enable USB on the 4GB RAM version. The temporary solution will consist in editing the file /boot/firmware/usercfg.txt to limit RAM to 3GB, as follows:

total_mem=3072
回复 支持 反对

使用道具 举报

 楼主| 2019-11-4 12:30:32 | 显示全部楼层
本帖最后由 liuqingsheng 于 2019-11-4 12:51 编辑
ZoeC5 发表于 2019-11-1 09:44
解决办法找到了,使用方法里面有讲,亲测可用 https:杠杠bugs点launchpad点net杠ubuntu杠+source杠linux-ra ...

我的是2G的pi4B ,直接安装19.10以及图形界面很正常。没有出现上述情况。我刚才看了UBUNTU论坛上的一些帖子,似乎都是4G内存版本的PI4B才有这个问题。树莓原生的debian9是正常的。

这是19.10 for 树莓派4G的BUG,UBUNTU 11月3日已经确定,计划修复中。


详见:
https://ubuntu.com/blog/roadmap-for-official-support-for-the-raspberry-pi-4

The Raspberry Pi 4 model B comes with different choices of RAM: 1GB, 2GB and 4GB. However, our official support for this board is currently limited to the 1GB and 2GB versions. Due to a kernel bug, USB ports are not supported out of the box in the official arm64 image on the 4GB RAM version. Kernel fixes have been identified by Canonical engineers. We are currently testing these fixes extensively. We will push updates within weeks, following successful test completion.

Raspberry Pi4型号B提供了不同的RAM选择:1GB、2GB和4GB。不过,我们对该板的官方支持目前仅限于1GB和2GB版本。由于内核错误,4gb ram版本的官方arm64映像中不支持现成的usb端口。内核修复已由规范工程师确定我们目前正在广泛测试这些修复程序在测试成功完成后,我们将在几周内推送更新。
In the meantime, developers can use a temporary workaround to enable USB on the 4GB RAM version. The temporary solution will consist in editing the file /boot/firmware/usercfg.txt to limit RAM to 3GB, as follows:
同时,开发人员可以使用临时解决方案在4GB RAM版本上启用USB。临时解决方案包括编辑文件/boot/firmware/usercfg.txt,将RAM限制为3GB,如下所示:
total_mem=3072



回复 支持 反对

使用道具 举报

2019-11-1 13:48:25 | 显示全部楼层
ZoeC5 发表于 2019-11-1 09:44
解决办法找到了,使用方法里面有讲,亲测可用 https:杠杠bugs点launchpad点net杠ubuntu杠+source杠linux-ra ...

非常感谢老哥,下班回去就试试,不过看的不是很懂啊😱(┯_┯)
回复 支持 1 反对 0

使用道具 举报

2019-11-1 09:44:40 | 显示全部楼层
sunyme 发表于 2019-10-29 13:09
啊,好像在看神仙打架,太高深了,哈哈

解决办法找到了,使用方法里面有讲,亲测可用 https:杠杠bugs点launchpad点net杠ubuntu杠+source杠linux-raspi2杠+bug杠1848703
回复 支持 反对

使用道具 举报

2019-10-29 13:09:22 | 显示全部楼层
ZoeC5 发表于 2019-10-29 09:01
周围看了下是系统的问题导致usb口没用了,,貌似已经有解决办法然而我看不懂,,
github点com杠raspberrypi ...

啊,好像在看神仙打架,太高深了,哈哈
回复 支持 反对

使用道具 举报

2019-10-29 09:01:44 | 显示全部楼层
sunyme 发表于 2019-10-28 20:10
哈哈,我遇到了和你一样的问题,正要回复,发现你已经先问了

周围看了下是系统的问题导致usb口没用了,,貌似已经有解决办法然而我看不懂,,
github点com杠raspberrypi杠linux杠issues杠3093
回复 支持 反对

使用道具 举报

2019-10-28 20:10:20 | 显示全部楼层
ZoeC5 发表于 2019-10-28 19:51
请问楼主有遇到过键鼠用不了以及命令行停在cloud-init的情况么?

哈哈,我遇到了和你一样的问题,正要回复,发现你已经先问了
回复 支持 反对

使用道具 举报

2019-10-28 19:51:24 | 显示全部楼层
请问楼主有遇到过键鼠用不了以及命令行停在cloud-init的情况么?
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

热点推荐

关注我们,了解更多

官方微信

服务时间:10:00-16:00

13714503811

公司地址:深圳市龙岗区南湾街道东门头路8号

Copyright © 2012-2020 Powered by 树莓派论坛 2019.4  粤ICP备15075382号-1
快速回复 返回列表 返回顶部